Sena-bluetooth SPH10H v4.2 User's Guide Manuel d'utilisateur télécharger pdf (Page 15)

SPH10H

8. INTERCOM PAIRING

8.1 Pairing with Other SPH10H Headsets

for Intercom Conversation

The SPH10H can be paired with up to three other

headsets for Bluetooth intercom conversation.

1. Turn on the two SPH10H headsets (A and B) that

you would like to pair with each other.

2. Press and hold the Jog Dial of the headset A and B

for 5 seconds until red LEDs of the both units start

to flash rapidly. You will hear a voice prompt saying

“Intercom pairing”.

3. Simply tap the Jog Dial of any one of the two

headsets A or B (It doesn’t matter that you

choose A or B.) and wait until the LEDs of both

headsets turn to blue and intercom connection

is automatically established. The two SPH10H

headsets A and B are paired with each other for

intercom conversation. If the pairing process is

not completed within one minute, the SPH10H will

return to stand-by mode.

B D

Pairing A & B

4. You can make other pairings between the headset

A and C, and between the headset A and D by

following the same procedure as above.

B D

Pairing A & C

Pairing A & D

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

Pas de commentaire

Sena-bluetooth SPH10H v4.2 User's Guide Manuel d'utilisateur Page 15