Sena-bluetooth SPH10 v4.2 User's Guide Manuel d'utilisateur télécharger pdf (Page 15)

SPH10

8. INTERCOM PAIRING

8.1 Pairing with Other SPH10 Headsets for

Intercom Conversation

The SPH10 can be paired with up to three other

headsets for Bluetooth intercom conversation.

1. Turn on the two SPH10 headsets (A and B) that you

would like to pair with each other.

2. Press and hold the Jog Dial of the headset A and B

for 5 seconds until red LEDs of the both units start

to flash rapidly. You will hear a voice prompt saying

“Intercom pairing”.

3. Simply tap the Jog Dial of any one of the two

headsets A or B (It doesn’t matter that you choose A

or B.) and wait until the LEDs of both headsets turn

to blue and intercom connection is automatically

established. The two SPH10 headsets A and B are

paired with each other for intercom conversation.

If the pairing process is not completed within one

minute, the SPH10 will return to stand-by mode.

B D

Pairing A & B

4. You can make other pairings between the headset

A and C, and between the headset A and D by

following the same procedure as above.

Pairing A & C

Pairing A & D

B D

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Pas de commentaire

Sena-bluetooth SPH10 v4.2 User's Guide Manuel d'utilisateur Page 15